Industrial Oil

In metal cutting operation ninety-seven percent of the energy consumed is converted into heat. If the right kind of cooling doesn’t take place at the cutting edge, the heat can damage both the cutting tool and the work piece as an

Knitting oil is non - corrosive, easily washable, non-abrasive which are self emulsifiable in water and provide high level of scour ability from knitted yarns or fabrics. Formulated by using high quality of mineral oils & fortified with

We are engaged in offering a wide range of lamp oil which is a purified mixture of liquid saturated hydrocarbons that are obtained from petroleum. These are transparent, colorless and odourless in properties. Our lamp oil remains free from

The word quenching means:

• Rapid cooling from a high temperature by immersion in a liquid bath of oil or water.       
• About 85% of quenching fluids are mineral oil based as the

Rubber processing oils  are used in the manufacture of virtually all rubber products such as tyres , tubes, battery cases, footwear, mats, hoses etc. They are the keystones from the raw material  stage to the finished products. Rubber

Shock Absorber oil is formulated using high performance base oils & combination of additives so as to provide excellent damping effect for shock absorbers used in motorcycles. This oil has excellent viscosity temperature, oxidation stability

Shuttering Oil is high quality mineral oil based mould releasing oil. It is used  as multi-purpose mould releasing agents for metallic and wooden moulds in concrete construction works. Shuttering Oil form / Form Oil / Concrete Form Oil a

Spindle oils are a type of low-viscosity mineral oils marketed for use in lubrication of high-speed machine spindles. Spindle oil is free from gumming properties. Since the viscosity is so low the oil runs off the surface of the spindle during

Base Oil is the name given to lubrication grade oils initially produced from refining crude oil (mineral base oil) or through chemical synthesis (synthetic base oil). Base oil is typically defined as oil with a boiling point range between

Electric Discharge Machining Oil is a metal removal process involving the removal of material from the work piece by a series of controlled electric discharges or sparks. The tool and the work piece are insulated by a special dielectric fluid.

Compressor Oil has been formulated from highly refined paraffinic base oils and high performance additives to provide outstanding lubrication in a variety of rotary and reciprocating air compressors. All ISO viscosity grades are formulated with